The Upload

Learn more about the advantages and disadvantages of injection molding and how to help minimize molding costs.

Here we take a brief look at selective laser sintering advantages and disadvantages to see if it could be the right choice for you.

The electric vehicle boom is in full swing and has recently expanded to mass transit, such as buses.

Stereolithography advantages and disadvantages

When comparing potential manufacturing processes against criteria like price and lead-time, there are many things to keep in mind. Different processes require different processing times, different types of materials, and most likely, different part design requirements and considerations. Today, we’re going to cover part design cost drivers.

There’s one of only a few 3D printing processes that is possible at both a desktop- and industrial-level. It’s fused deposition modeling (FDM), although you’ll sometimes see it referred to as fused filament fabrication (FFF). It’s a great printing process to create prototype parts to test fit and form. Because it prints using thermoplastic material, it also delivers parts that are functional when in a high-heat environment, or when exposed to chemicals or mechanical stress.

We sat down with co-founder and COO, Ian Hillier, to chat about Hacksmith’s humble beginnings, its latest Hulkbuster project (which we were psyched to assist with for 3D-printed components), and what’s next for the creative crew.

When you hear the term “over-engineering,” you probably think about all of those overly complicated products we’ve all encountered that seem too complex relative to their intended use. The confusing shower faucet controls. The washer or dryer with a dizzying array of counter-intuitive buttons and settings. Your new car’s baffling audio setup. Well, you get the idea.

Finishing options for sheet metal vary depending on your needs. For instance, are you looking for an aesthetically pleasing part, a part that needs to withstand environmental challenges and wear, or are you testing overall functionality?

It is not a question of if but rather when will the next black swan event hit the globalized supply chain. And it is critical that companies learn from the last couple of years and develop an agile supply chain network that delivers value, reduces risk, and is not just driven by cost.

It’s that time of year again, time for the BattleBots to go at it to see who is the fiercest in the BattleBox. For the third time, Protolabs is powering DUCK!, the 250-pound, low-riding, and somewhat adorable competitor from Team Black and Blue.

The speed and complexity of modern manufacturing have pushed the limits of what a traditional CNC machine can handle. Let’s walk through the critical components enabling the next generation of CNC manufacturing.